Bare Conductive Touch Board Starter Kit
- Conductive paint (which is awesome on its own)
- Paired with an Arduino-compatible board
- To make any object interactive
In the Bare Conductive Touch Board Starter Kit, you'll find a Touch Board, conductive paint in two different forms, plus all the components that will make your experimentation fun so you don't have to rummage through the house to gather them. Conductive paint is one of our favorite products we've offered over the years. You can paint it onto walls, floors, any surface (except skin), and it will conduct electricity. Pair that with the Touch Board that's ready for your imagination, and you can be off and running almost immediately. Touch-sensitive toilet seat that rickrolls the unwitting party pooper? Where do we sign up?
The Arduino-compatible Touch Board is pre-programmed to trigger MP3 tracks so no programming or electronics experience is required to get started. But if you're into that, you can re-program the Touch Board using the Arduino IDE. Make one or all of the 12 sensors work via proximity, enable MIDI output, or add any Arduino-compatible shield to the board.
- Bare Conductive Touch Board Starter Kit
- Conductive paint paired with an Arduino-compatible board for safe fun with electricity
- Connect any surface, object, or space to the digital world
- Touch board can be powered and programmed over USB
- 1 Touch Board (Arduino-compatible, Atmel ATMega32U4 Microprocessor, Freescale MPR121 dedicated touch interface, VLSI VS1053B audio processor, 32 KB of Flash Memory, 5V operating voltage, 16 MHz clock speed, 20 digital I/O pins, 7 PWM channels, 12 analog input channels, 12 Touch electrodes - find all the details here)
- 1 Electric Paint 10ml Pen
- 1 Electric Paint 50ml Jar
- 1 Guidebook
- 1 MicroSD Card
- 1 MicroSD Card Reader
- 1 Micro USB Cable
- 1 Mini Speaker
- 12 Alligator Clips (colours may vary)
- 1 House Stencil
- 1 Stencil Brush
- 12 Sticky Tabs
- 3 Velcro Stickers
- 2 Paper Cutouts
- Dimensions: 3.3" x 2.4" foot print with maximum height of 0.4" (audio connector)
- LiPO battery not included
- Do NOT use the paint on your skin, k? k.
- Children under 12 years of age must be supervised by an adult whilst using this product. This kit contains small components. Keep out of reach of young children.
Wanna chat about it?
Have questions about Bare Conductive Touch Board Starter Kit or your order? We monitor these comments daily, but it may be faster to email us directly or call us at 1-888-GEEKSTUFF.